Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post Reply
User avatar
ambolik
Posts: 17
Joined: Mon Sep 17, 2018 9:04 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by ambolik »

chkops wrote:Voyons, amigo... le FZ n'est pas compatible Atmos et c'est pour cela que tu ne verras jamais le logo Atmos s'afficher dans le descriptif des programmes Netflix à partir de l'appli du Tv. Et, il en va de même pour le Dolby Vision... tu auras toujours "HDR" à la place.

Concernant ta question au sujet du mode "Statique" ou "Dynamique", à vrai dire, je n'y ai pas prêté attention. Je vais essayer de voir ça, ce soir.

Mais quel c**!!! [emoji51] Mais bien sûr, je crois tellement que c’est un acquis pour tous l’Atmos maintenant moi!!! [emoji28] Merci Chkops pour la correction de cette belle faute d’étourderie...

En tout cas, ça laisse le reste de ma question valide: statique ou dynamique le mode Netflix Calibrated.

En tout cas, lu sur whathifi.com:

« When we first heard about Netflix Calibrated Mode (it was announced in July 2018), we assumed it would be a responsive feature that would use metadata to tweak settings depending on the specific content being viewed, but that isn’t the case. Instead, this is simply a blanket selection of picture settings that Netflix says gets the best out of all of its content. »

En gros ça serait un mode statique, donc totalement reproductible et sauvegardable.
User avatar
AlexScan
Posts: 1427
Joined: Mon May 09, 2016 1:22 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by AlexScan »

david555 wrote: Fri Aug 30, 2019 8:54 am La barrière des 900 rivets HDR en OLED brisée par Panasonic GZ2000

Źródło: https://hdtvpolska.com/bariera-900-nito ... ic-gz2000/

940 nits sur fenêtre L20
Pas mal... j'attendais les mesures du polonais, pour comparer rien de tel que des situations réel d'image HDR...

Sur l''Odyssée de Pi le GZ fait 925 nits et mon ZF9 1260 nits... c'est clairement suffisant, je trouve le ZF9 à fond trop fort pour moi dans le noir complet...
Last edited by AlexScan on Fri Aug 30, 2019 4:44 pm, edited 1 time in total.
Source HC: PCHC Radeon Vega 56 / Creative X-Fi Elite Pro Source Hifi: Asus Essence ST -> DSPiy
Ampli HC/Hifi: Ampli DIY 7x250w IRAUDAMP7S TV: Panasonic 65GZ2000 (calibré)
Enceintes: JAMO THX ONE (en prêt en attendant le 5.1 Full DIY)
chkops
Posts: 413
Joined: Fri Jun 14, 2019 3:13 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by chkops »

Un p'tit GZ, Alex ? :lol:
User avatar
AlexScan
Posts: 1427
Joined: Mon May 09, 2016 1:22 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by AlexScan »

chkops wrote: Fri Aug 30, 2019 4:43 pm Un p'tit GZ, Alex ? :lol:
Nop j'ai toujours pas les moyens... mais c'est encourageant pour le futur de l'OLED...
Source HC: PCHC Radeon Vega 56 / Creative X-Fi Elite Pro Source Hifi: Asus Essence ST -> DSPiy
Ampli HC/Hifi: Ampli DIY 7x250w IRAUDAMP7S TV: Panasonic 65GZ2000 (calibré)
Enceintes: JAMO THX ONE (en prêt en attendant le 5.1 Full DIY)
costaud28
Posts: 1024
Joined: Thu Apr 19, 2012 10:55 am

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by costaud28 »

Pour ceux qui ont utilisé CALMAN for Pana, l'activation de l'ISFccc network c'est bien dans le menu "image" du Pana ? sous le lock settings ?
Pas trouvé dans le menu "image" sur le GZ1500 :(
squall049
Posts: 496
Joined: Fri Sep 01, 2017 8:50 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by squall049 »

il faut d'abord rentrer un code pin, pour faire apparaître l'isfccc
User avatar
david555
Posts: 2042
Joined: Tue May 01, 2012 9:44 am

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by david555 »

Code i085
squall049
Posts: 496
Joined: Fri Sep 01, 2017 8:50 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by squall049 »

pour les GZ, on peut mettre n'importe quel code pin apparemment. Suffit d'en choisir un :)
User avatar
david555
Posts: 2042
Joined: Tue May 01, 2012 9:44 am

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by david555 »

Ah bon ?
squall049
Posts: 496
Joined: Fri Sep 01, 2017 8:50 pm

Re: Panasonic 2019 GZ2000 OLED HDR10+ ET DOLBY VISION

Post by squall049 »

david555 wrote: Sun Sep 01, 2019 4:22 pmAh bon ?
ouaip !
Under Picture\Lock Settings, enter PIN...
For 2018 and older models: Press the i button on the remote then press 0, 8, 5
On 2019 an newer models: You can set your own 4 digit PIN
Post Reply