Salut.realzven wrote:alex, tu as pu faire le tour du disque ?
J'ai bien avancé mais je n'ai pas fini d'explorer toutes les mires. J'ai quand même fait un quick profil avec LSCMS (plus de 140 points) et tout s'est super bien passé.
Et toi ?
Salut.realzven wrote:alex, tu as pu faire le tour du disque ?
pre-calibration tools workflowI have created 2 Workflows to make my disk users experience/calibration time simplier - easier - faster!
Pre-Calibration Tools + Verify Calibration Tools Workflows for CalMAN 5.2a.
ConnecTEDDD wrote:
Today I have added some new pages for the Ted's LightSpace CMS Calibration Disk CalMAN 5 Workflow Users.
This Meter Profiling Check layout page is useful for users to check if their meter profiling correction table is accurate.
I'm sure you will be surprised when you will find out that your familiar meter profiling procedure you followed since now maybe has create some not valid tables for some reason but you haven't realized that this is be possible because you have always followed the correct way but you haven't checked it.
Use this Reference Meter Page to take WRGB measurements using your Spectro and after that run your meter profiling procedure. (re-measure again the WRGB patches using your spectro and colorimeter)
Later, use the Profiled Meter Page to measure the WRGB Patches with your Profiled Meter to see if the correction table is accurate vs. your reference meter readings.
You will found that sometimes it will need to re-perform your meter profiling 2-3 times to get you accepted results. Count also your meter repeatability/display instability here that maybe produce inaccurate meter correction tables.
Here is a 11-Point Grayscale for users who want to use their internal display multiple-step grayscale RGB Balance Controls in case they have checked before that if these controls are not introducing problems in Grayscale Ramps.
White Balance page can be used to check differencies of meter integration time or sync settings to help you find out your best repeatability/speed meter setting of your current display.
You can use this Color & Tint Page to check your Gamut performance, check what is happening by tweak your Color or Tint settings, help you choose your color space, or manual perform 6-Axis CMS Calibration. There indicators that will help users with HSL or RGB Display Controls of each color.
* Meter Profiling Check Page has been added to Verify Calibration Tools Workflow also.
More Screenshots of CalMAN 5 Workflow Pages that my disk user have access can be found here.