bonsoir a tous ,
Je vais recevoir sous peu un X 55 d occase , celui de NEON , et le logiciel callman me tente bien..........
je me pose la question de la version a acheter sachant que ma sonde est la eye one pro OEM du kit chromapure ?.........
merci d un avis
a+
Logiciel de calibration CALMAN par Spectracal
- SOUTHSTAR
- Posts: 355
- Joined: Wed Oct 17, 2012 10:16 am
Re: Logiciel de calibration CALMAN par Spectracal
rien n est plus dangereux que la certitude d avoir raison ........F. JACOB " prix nobel "
- alex_t
- Posts: 661
- Joined: Mon Jul 22, 2013 8:06 am
Re: Logiciel de calibration CALMAN par Spectracal
Salut.SOUTHSTAR wrote:bonsoir a tous ,
Je vais recevoir sous peu un X 55 d occase , celui de NEON , et le logiciel callman me tente bien..........
je me pose la question de la version a acheter sachant que ma sonde est la eye one pro OEM du kit chromapure ?.........
merci d un avis
a+
Pour pouvoir utiliser les fonctions de calibration automatiques de Calman pour le JVC X55 il te faut la version Enthousiast.
Explication licence: http://store.spectracal.com/calman5/licenses
Le hardware supporté: http://store.spectracal.com/support/har ... pport.html
A+
-
- Posts: 35
- Joined: Sun Feb 24, 2013 11:52 am
Re: Logiciel de calibration CALMAN par Spectracal
Calman est compatible avec tout type de sonde oem et commerce mais si tu décides de passer à un autre soft il risque de n'être compatible qu'avec une oem. J'ai acheté la mienne est angleterre sur les conseils d alex_t et je ne regrette pas. C'est une version oem
- SOUTHSTAR
- Posts: 355
- Joined: Wed Oct 17, 2012 10:16 am
Re: Logiciel de calibration CALMAN par Spectracal
merci des réponses .....je vais voir ça .....d abord calibrer avec le kit chromapure juste la temp de couleur , garder le gamma usine et le gammut .
si je vois que ça me plait pas j irais voir ce soft CALLMAN qui a l air magnifique
a+
si je vois que ça me plait pas j irais voir ce soft CALLMAN qui a l air magnifique
a+
rien n est plus dangereux que la certitude d avoir raison ........F. JACOB " prix nobel "
- alex_t
- Posts: 661
- Joined: Mon Jul 22, 2013 8:06 am
Re: Logiciel de calibration CALMAN par Spectracal
Le kit Chromapure est déjà un très bon produit. Je ne suis pas certain que tu sois obligé de migrer vers CALMAN sauf si tu désires calibrer automatiquement ton JVC X55 (CMS et gamma).SOUTHSTAR wrote:merci des réponses .....je vais voir ça .....d abord calibrer avec le kit chromapure juste la temp de couleur , garder le gamma usine et le gammut .
si je vois que ça me plait pas j irais voir ce soft CALLMAN qui a l air magnifique
a+
- SOUTHSTAR
- Posts: 355
- Joined: Wed Oct 17, 2012 10:16 am
Re: Logiciel de calibration CALMAN par Spectracal
oui sans au aucun d autant que j ai reçu le projo , j ai conservé le gammut travaillé par un expert , placé un gamma usine qui me plait bien a 2,4 .
je vais juste revoir la temp de couleur que je trouve un poil trop verdatre , voir si je peux corriger dans le menu usine , bleu donc rouge ......
merci encore
a+
je vais juste revoir la temp de couleur que je trouve un poil trop verdatre , voir si je peux corriger dans le menu usine , bleu donc rouge ......
merci encore
a+
rien n est plus dangereux que la certitude d avoir raison ........F. JACOB " prix nobel "
- realzven
- Posts: 214
- Joined: Sat Jul 20, 2013 5:30 am
- realzven
- Posts: 214
- Joined: Sat Jul 20, 2013 5:30 am
Re: Logiciel de calibration CALMAN par Spectracal
New calman workflows
ConnecTEDDD wrote:
Today I have added some new pages for the Ted's LightSpace CMS Calibration Disk CalMAN 5 Workflow Users.
This Meter Profiling Check layout page is useful for users to check if their meter profiling correction table is accurate.
I'm sure you will be surprised when you will find out that your familiar meter profiling procedure you followed since now maybe has create some not valid tables for some reason but you haven't realized that this is be possible because you have always followed the correct way but you haven't checked it.
Use this Reference Meter Page to take WRGB measurements using your Spectro and after that run your meter profiling procedure. (re-measure again the WRGB patches using your spectro and colorimeter)
Later, use the Profiled Meter Page to measure the WRGB Patches with your Profiled Meter to see if the correction table is accurate vs. your reference meter readings.
You will found that sometimes it will need to re-perform your meter profiling 2-3 times to get you accepted results. Count also your meter repeatability/display instability here that maybe produce inaccurate meter correction tables.
Here is a 11-Point Grayscale for users who want to use their internal display multiple-step grayscale RGB Balance Controls in case they have checked before that if these controls are not introducing problems in Grayscale Ramps.
White Balance page can be used to check differencies of meter integration time or sync settings to help you find out your best repeatability/speed meter setting of your current display.
You can use this Color & Tint Page to check your Gamut performance, check what is happening by tweak your Color or Tint settings, help you choose your color space, or manual perform 6-Axis CMS Calibration. There indicators that will help users with HSL or RGB Display Controls of each color.
* Meter Profiling Check Page has been added to Verify Calibration Tools Workflow also.
More Screenshots of CalMAN 5 Workflow Pages that my disk user have access can be found here.
- realzven
- Posts: 214
- Joined: Sat Jul 20, 2013 5:30 am
Re: Logiciel de calibration CALMAN par Spectracal
Update : New calman Pre-calibration tools 1.0.3 workflow
News : Next week, the MP4 Media Files Version of the Disk will be available
More news : http://www.displaycalibrations.com
News : Next week, the MP4 Media Files Version of the Disk will be available
More news : http://www.displaycalibrations.com
- realzven
- Posts: 214
- Joined: Sat Jul 20, 2013 5:30 am
Re: Logiciel de calibration CALMAN par Spectracal
UpdaTED CalMAN 5 Workflows (For Ted's Lightspace CMS Calibration Disk Users) for CalMAN 5.2.2.1404 Release.
2 New Pages Added to Pre-Calibration Tools Workflow.
Advanced Color Gamut Page: For simplier gamut manual CMS using internal display 6-Axis CMS Controls . Default: 100% Saturation / 100% Stimulus Level but it can be changed manually from the user to 75% Stimulus Level.
Advanced Color Saturation Page: For simplier saturation manual CMS using internal display 6-Axis CMS Controls. Default: 75% Saturation / 75% Stimulus Level but it can be changed manually from the user to 100% Stimulus Level.