PCHC / HIFi : La config d'Adhara

JEANBAPT53
Posts: 319
Joined: Mon Oct 22, 2012 10:03 am

Re: PCHC / HIFi : La config d'Adhara

Post by JEANBAPT53 »

bonsoir avez vous des endroit ou on peu acheté un htpc monté et configuré
hélas je n'est pas les compétence et la patience pour me faire mon pchc
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

JEANBAPT53 wrote:bonsoir avez vous des endroit ou on peu acheté un htpc monté et configuré
hélas je n'est pas les compétence et la patience pour me faire mon pchc
Bonjour,

Malheureusement non.
Il y a des boutiques qui assemblent des PC dont les éléments sont sélectionnés par l'acheteur, mais:

1 - Il faut déjà savoir quels éléments on veut (et ces boutiques sont souvent de mauvais conseils, incompétentes pour tout ce qui est config. hors jeux ou bureautique).
2 - Quand on voit comment ils montent les éléments, autant dire qu'il faut tout débrancher et remonter soi même...
Une fois une de ces boutiques avait fixé les éléments avec de la paraffine sur la carte mère. Ça a été renvoi direct et demande de remboursement.
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
tiptoe
Posts: 783
Joined: Mon Aug 19, 2013 2:25 am

Re: PCHC / HIFi : La config d'Adhara

Post by tiptoe »

Interessant ce shema, j'utilise le 3dlut justement, j'ai dégrossi sur la tv avec le peu de cms que j'ai avabt, c'est magique ce truc. . Combien d'heures et 3prise de tête économisé ^^,

Par contre le smooh motion... je n'ai jamais réussi avoir un truc correct.
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

tiptoe wrote:Interessant ce shema, j'utilise le 3dlut justement, j'ai dégrossi sur la tv avec le peu de cms que j'ai avabt, c'est magique ce truc. . Combien d'heures et 3prise de tête économisé ^^,

Par contre le smooh motion... je n'ai jamais réussi avoir un truc correct.
Quel problème avec le smooth motion ?
Je reçois ma GTX 960 demain, la GTX 750 est très bien mais depuis la vente du Lumagen, c'est MadVr qui fait l'upscale 4K, du coup mon temps de rendering à grimpé en flèche.
En 4K ca passe bien sur du 24 ims mais plus sur des videos entrelacées (concerts ou reportages en 60 ims).
Et si j'ajoute le fichier LUT (13x13x13), plus rien ne passe :D

Par contre en direct du PCHC vers ma TV, l'image est plus dynamique..plus belle.
C'est comme si mon Lumagen avec le traitement Darbee ajoutait un voile à l'image.
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

Suite à un problème, changement de carte mère pour une Asrock z77 extreme6 (avec condensateurs premium + phase d’alimentation 8+4).

Trouver une CM pour chipset 1155 commence à devenir difficile...
Les condensateurs solides « Premium Gold » sont des produits haut de gamme, de fabrication 100% japonaise assurant une durée de vie optimale et garantissant des performances stables.
.....
Cette carte mère est équipée d’une phase d’alimentation 8+4. Elle vous offre des composants de qualité ainsi qu’une alimentation stable de votre processeur. De plus, elle vous offre des capacités inégalées en overclocking et d’incroyables performances avec une température de fonctionnement réduite pour répondre aux besoins des joueurs les plus exigeants.
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

Petit conseil ou astuce, n'attendez pas que JRiver mette à jour le moteur vidéo MadVR. Celui peut être installé indépendamment (comme LaV). cIl y a souvent plusieurs moi de décalage....

http://forum.doom9.org/showthread.php?p ... ost1271417

MadVR est installé sous ....\AppData\Roaming\J River\Media Center 20\Plugins\madv
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

J'ai encore réussi à gagner un gros plus qualitatif sur l'image.
Pour cela il faut activer sur le control panel Nvidia le Noise Reduction (30%) ainsi que le Edge Enhancement (40%) et l'image est :o

Je n'ai pas trouvé l'astuce de moi même, rendons à César ce qui est à César...

http://wiki.mikejung.biz/Nvidia_Noise_R ... ction_720p
http://wiki.mikejung.biz/Nvidia_Edge_Enhancement
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

La dernière version de Jriver incorpore le décodage des fichiers DTS/Dolby HD, il n'y a plus besoin de la librairie Arcsoft.
Par ailleurs si vous utilisiez cette dernière, il est fortement conseillé de la supprimer de votre système.
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
User avatar
Adhara
Posts: 784
Joined: Sun Aug 18, 2013 5:52 pm

Re: PCHC / HIFi : La config d'Adhara

Post by Adhara »

La version 3 de Dispcal vient de sortir: http://dispcalgui.hoech.net/

3.0

Added in this release:

Tabbed user interface. See screenshots.
Full support for Argyll CMS 1.7.0, which includes support for the ColorHug2, K-10A, Spyder5, the capability to use a Google Chromecast as pattern generator, and more. Note that the accuracy of using a ChromeCast is limited due to the internal RGB to YCbCr conversion and upscaling in the device.
Optional automatic testchart optimization as part of the characterization process.
madTPG launches automatically when used (requires madVR 0.87.12 or later).
Optionally create a 3D LUT automatically after profiling. 3D LUT settings are stored in the profile and synced with measurement report settings when loaded.
1-click install of madVR 3D LUTs after generation (requires madVR 0.87.12 or later).
3D LUT maker: Optionally allow to use PCS-to-device instead of inverse device-to-PCS gamut mapping. This allows for fast creation of 3D LUTs, but the result is dependent on the quality and accuracy of the profile's B2A tables.
3D LUT maker/measurement report: Added an option to just apply black output offset to the tone response curve instead of overriding it completely. This option is only available for source profiles that have a tone response curve which is not defined by a simple power function (e.g. sRGB). Also added a warning message if input values would be clipped when using the tone response curve unmodified.
Show reference versus corrected colorimeter measurements along with delta E when creating a colorimeter correction matrix.
Optionally clip WTW on input when creating a 3D LUT (requires Argyll CMS 1.7 or later).
Additional error checking for patterngenerator network interface: Check if each Argyll test pattern update is followed by a network send. Fail with a sync error otherwise.
Easily create a compressed archive of the currently selected profile and related files with the click of a button next to the “Settings” dropdown.
Testchart editor:
Support loading of CGATS files which do not contain XYZ values.
CSV import (drag and drop a CSV file) and export.
Export 16-bit PNG and TIFF or 10-bit DPX files.
Improved speed of image file export.
Dragging and dropping image files extracts and adds reference patches if a preconditioning profile is set.
Changed in this release:

Generate XYZ LUT profiles by default and for all presets. Consequently, black point compensation now defaults to off and is an advanced option (not shown by default).
XYZ LUT + matrix profiles will always have black point compensated matrix TRC tags. That way “dumb” applications which fall back to the matrix won't clip shadow detail if they don't support BPC internally, while “smart” applications can use the accurate LUTs.
When creating XYZ LUT profiles with enhanced effective PCS-to-device table resolution, improve reproduction of saturated colors for displays with limited gamut (e.g. smaller than sRGB), increasing visible detail and saturation in those areas. This should typically affect saturated blues the most. Users of displays that cover most of sRGB except parts of the blue region may see an improvement as well. Also, more accurately encode the PCS-to-device black point.
Show display technology type of spectral colorimeter corrections and sort by the shown name instead of the filename.
Moved display update delay and settle time controls to main window (“Show advanced options” must be enabled).
Force a minimum display update delay of 600 ms for Resolve irrespective of chosen preset.
Don't unload current settings file when changing calibration tone curve to “As measured”.
When creating a profile, automatically filter out XYZ = 0 readings if the RGB stimulus is < 5% (except black).
Files generated during incomplete/failed runs are moved to a different location than the storage directory. See “User data and configuration file locations”, “Incomplete/failed runs”. Compare the list of files in the temporary directory and their modification times before and after running Argyll CMS tools to determine if files should be kept in case of errors.
When updating via Zero Install, force exact version.
3D LUT: Default to 65x65x65 cube for all 3D LUT formats except Pandora (.mga) which only supports 17x17x17 and 33x33x33.
3D LUT: Default to 16..235 TV level encoding for the eeColor.
Measurement report: Changed displayed range of Y to be always 0..100 with four decimal digits.
Linux, Windows: On application startup, the current video LUT is restored after checking video LUT access. This differs from the previous behavior where the video LUT was reset to the calibration (if present) of the currently assigned display profile(s) (if any).
Fixed in this release:

Error message when trying to quit the application while the “About” dialog was shown (regression of a change in 2.6 how lingering dialogs are handled on application exit).
Using Resolve as pattern generator prevented ambient measurements.
Fixed bug with Resolve interface related to APL that resulted in pattern updates being rejected by Resolve due to negative background RGB. This could happen with bright patches if the test patch size was above roughly 30% and below 100% screen area.
Due to file descriptors for session logfiles not being closed after being done with the file, dispcalGUI could run out of available file descriptors when used to create or inspect a large amount of profiles in a single session.
Disabled rollover for session logfiles.
Worked around uninitialized variables with Argyll's xicclu utility in versions 1.6.x to prevent unexpected color lookup output values.
Make sure the 1% reading during calibration check measurements doesn't trigger continuing to the following step.
Clicking the “Pause” button on the progress dialog in the first few seconds before instrument initialization was complete would not pause measurements, and disabled the button until clicking “Cancel”.
Verifying a device link created with an encoding other than full range RGB.
Curve viewer: Amount of tone values and grayscale % for calibration curves was not calculated correctly if the number of entries was not 256.
Testchart editor: Deleting a selection of non-consecutive rows didn't work correctly.
Sony 65ZD9 / PCHC (Pink Faun I2S + OCXO + Linear PSU) / Audio-GD R2R-7 / Heed Thesis Lambda&Gamma / M-Monitors M1 / Powergrip YG-1 / Câbles: BBtech Réf,Pink Faun HDMI,Pangea
Corbendallas
Posts: 305
Joined: Fri Jun 01, 2012 8:05 am

Re: PCHC / HIFi : La config d'Adhara

Post by Corbendallas »

Bonjour

déterrage de topic :D

Je compte m'installer un nouveau PCHC.
Actuellement j'ai :
- core i5 3570K
- CM Gigabyte Z77
- 8 Go ram Crucial
- SSD Plextor M5 PRO
- Sapphire HD 6670 passive
- Alim corsair je crois mais j'en suis plus sur, je l'ai monté il y a 2 ans
Le tout tourne sous Seven et la config Kaz (pas à fond du coup), c'est moins perfectionné que vous je l'avoue!

Diffuseur UHD Sony kd65x8505c

Je veux changer de boitier pour pour passer à un noir et me dit que c'est peut être l'occasion de refaire une config ;)
J'hésite entre ATX et mini itx.
Parmi les boitier ATX, j'aie beaucoup le node 605.

J'ai commencé par me prendre en occasion une carte MSI 960GTX Gaming 2Go, comme vous.
Je vois que vous avez monté une .
Pas de problème de place pour monter la MSI 960GTX dans le boitier fractal node 605?
est elle vraiment silencieuse?
jusqu'à présent je n'ai eu que des fanless.

Pour le reste je pensais à:
core i7 6700
carte mère H170
16Go DDR4

merci pour vos avis
TV SAMSUNG QE65Q90R sur meuble sonorous - Ampli ANTHEM 310 couplé à un kit SVS 5.1 - OPPO UDP-205EU - NAS SYNOLOGY 1817 - PS4 - Casque SONY MDR-HW700DS
Post Reply