Becuwe Nicolas wrote:
Par contre, pas d'auto Lipsync, pas de synchronisation manuelle audio/vidéo
Je crois ( pas sur ) qu'il faut l'HDMI 1.4 pour l'auto lipsync.
Dommage par contre qu'il n'y ait pas le réglage manuel, on trouve parfois certaines vidéos décalées, c'est bien pratique.
Ce n'est présent sur aucune Dune ce réglage avec le firmware commun, c'est étrange ?
Tant que j'y pense, peux-tu tester le clipping avec ce fichier de test en HD ? :
http://www.2shared.com/video/_nhcNcLP/Clipping.html
Ca provient du Blu-Ray de calibration Spears&Munsil , explication du test par M. Spears :
" The way the pattern works is like this:
1. If white is clipped and RGB is not, this is the HDMI bug. This works because the white values are above 235 in Y. The RGBs will not clip because they are all within 16-235 in Y'CbCr. They only fall outside of 16-235 when converted to RGB.
2. If the RGB are clipped and white is not, this is often caused by:
-a. Color set incorrectly. usually too high.
-b. Could also be caused by RGB gain controls being set too high.
3. If they are all clipped, it can be caused by contrast set too high or conversion to PC levels. e.g. 16-235 is expanded to 0-255.
4. If green is clipped, but white, red and blue are not, this is usually caused by incorrectly using the 601 matrix instead of the 709 matrix when converting to RGB. Here is an example of that:
Sur cet exemple, le vert clippé ( volontairement, pas la faute du PC lol ) et indique l'utilisation de la matrice 601 au lieu de la 709 HD, mauvaise matrice donc.
Plus de détails sur leur site :
http://www.spearsandmunsil.com/articles ... dtint.html
Ce test est d'ailleurs intéressant pour tout diffuseur et donc pour tes tests, par exemple, je l'ai essayé sur Popbox V8 ( matrice 601 ) et il est correct sur Popcorn A-300 et Sidewinder 3 ( testé par Dreamy ). Je conseille d'ailleurs à tous ce Blue-Ray de calibration, vraiment très bien fait et ultra-complet pour tester diffuseurs et receveurs.
J'espère qu'il est OK sur le Dune HD-TV301, tiens-moi au courant
