OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post Reply
Coris
Posts: 22
Joined: Tue May 24, 2016 8:48 am

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by Coris »

Well, such measurement approach it is quite time demanding task. For moment I really do not have the necessary time to focus on this. Also the 101 device I have right now on bench is not mine, and I can not keep it for enough long time, to do detailed measurement investigations. Else, it could be interesting to have some comparative measurements, quantifying so the improvement, which is at least very obvious.

I will not state that especially my LPM it do this improvement. There is the approach/principle itself, which it produce such improvements: analogue/cleaner power for a digital stage. This my last LPM version it is also improved, by increasing dramatically the filtering capacities, before and after the regulator devices. So, the parameters of the power supply it gets higher, and the impact over the powered devices/stages it is also even more positive. One should remember that here is about a primary power supply, which is meant to deliver raw power further to the rest of the power system, distributed on local processing stages. So, the noise level of a such primary power supply does not necessary have to be of an ultra low noise one standard. What is important here, in my opinion, is the completely different powering approaches between a SMPS and a analogue PSU. A SMPS it produce over the main DC on its output, a large spectre/level HF noises, not possible to be completely filtered out, while a linear PSU does not. There is also obvious that the way a SMPS it power a system it have negative impact over the quality of the final result. In my opinion, this is a real fact, demonstrated very simple by replacing the SMPS, by a linear PSU (or the opposite...).
boubou
Posts: 42
Joined: Sat Nov 14, 2015 1:20 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by boubou »

Bonjour tout le monde, :salut:

Je souhaiterai remplacer mon lecteur Panasonic BMP-500, soit par un Oppo 101 avec carte 7.1, soit par un lecteur Cambridge CX-U.

Etant un peu perdu, je sollicite vos lumières...

Je ne souhaite pas régresser en qualité de son et d'image par rapport au Panasonic.

Sinon faut-il attendre les futures Oppo UHD?
Yamaha RX-A3020 - MiniDSP DDRC-88A - Yamaha 2x P7000s + 1x P3500s - Oppo 203
Magnat Quantum 1009 - Cabasse Ambrose 3 - Cabasse IO2 -
Tx-58dx900e
ultrathx2
Posts: 68
Joined: Sat Aug 13, 2016 5:00 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by ultrathx2 »

bonjour,

je suis fortement interéssé par cet oppo pour remplacer ma sony s790 mais aussi ma popcorn a400 (dont je trouve parfois l'image superieure a ma platine avec plus d'effet 3d et plus de peche pour les couleurs !), pensez-vous que cette platine puisse remplacer un lecteur multimédia comme une popcorn, sachant bien sur que la gestions des jaquettes est médiocre, mais elle existe ! ce qui est déjà énorme et pensez_vous qu'un firmware viendra un jour améliorer cette gestion des jaquettes ?

sinon trouvez-vous que d'avoir une popcorn avec un oppo n'est pas un peu redondant ?

au fait est-ce que cette oppo est tweakable ? peut on lui donner une colometrie plus cinéma comme les pio grace à un scaler ???

Cordialement

ps : j'ai l'opportunité d'avoir cette oppo à 390 euros la version de base, trouvez-vous que c'est une bonne affaire ?
ultrathx2
Posts: 68
Joined: Sat Aug 13, 2016 5:00 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by ultrathx2 »

j'aimerais savoir si certains ont pu faire une comparaison oppo 101 et pio lx58, en évitant les fanboy de chque camp bien sur, j'aimerais un avis si possible objectif sachant que je dois l'associer à un sony hw30es...
J'ai dejà possédé du pio mais c'etait à l'époque du dvd et c'etait du grand pio, le pio m'attire par sa qualité de fabrication son aspect massif et son image ciné, l'oppo pour ses multiples talents en décodage des formats multimedia et comme plateforme multimedia mais aussi modulable, apres j'ai jamais vu tourné une oppo...
par exemple est-ce que l'oppo a une image superieure à une popcorn a400 ?
COrdialement et merci à tout ceux qui me répondront
User avatar
DrPrice
Posts: 139
Joined: Mon Aug 08, 2016 11:47 am

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by DrPrice »

ultrathx2 wrote: PS : j'ai l'opportunité d'avoir cette oppo à 390 euros la version de base, trouvez-vous que c'est une bonne affaire ?
Oui ! Clairement !

J'ai quand même une question : qu'est ce qui justifie les 540€ ou les 900€ des modèles plus haut de gamme par rapport aux tarifs "de base" de platines type Samsung à 150€ disons...?

Une vraie différence se voit ?
Salon : Sony KD-55X8005C + Bose Solo 15 Serie II + PS4 / Projecteur Sanyo PLV-Z3 + Écran Celexon
Chambre : Philips 47PFL5008H + Bose Solo 15
Audio portable : Bose SoundTouch 30 - B&W Zeppelin - Bose QC25 - Sony MDR-1AB - Shure SE535
User avatar
Hiperia
Posts: 2440
Joined: Wed Oct 24, 2012 5:18 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by Hiperia »

Hiperia wrote:Je pense pas que les nouveaux OPPO seront à des années lumières des autres platine UHD, je parle niveau performance pure.
C'est juste qu'avec OPPO on à certain avantage :

- Le suivi de OPPO est top ( mise à jour ).
- Grande possibilité d'évolution ( tweak ).
- Certaine fonction bien spécifique ( scaler , lecture son HD sur mkv etc ).
- La qualité du matériel. j'ai eu tout les OPPO depuis les 83. Aucune panne !
Voila pourquoi il y à une différence de prix significative.
Certain pense que c'est justifié et d'autre non .....
OPPO 105EU
SONY HW55 sur toile Cinescreen 4K reférence.
Stéréo : Wavecor WF182BD10-SB acoustics TW29RN
Centrale : Wavecor WF182BD10-SB acoustics TW29RN
Surround : Focal IC-706V
Sub : Eminence Lab-12
Ampli : CROWN XTI - HYPEX PSC2.400 - T.amp
User avatar
Hiperia
Posts: 2440
Joined: Wed Oct 24, 2012 5:18 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by Hiperia »

Coris wrote:Well, such measurement approach it is quite time demanding task. For moment I really do not have the necessary time to focus on this. Also the 101 device I have right now on bench is not mine, and I can not keep it for enough long time, to do detailed measurement investigations. Else, it could be interesting to have some comparative measurements, quantifying so the improvement, which is at least very obvious.

I will not state that especially my LPM it do this improvement. There is the approach/principle itself, which it produce such improvements: analogue/cleaner power for a digital stage. This my last LPM version it is also improved, by increasing dramatically the filtering capacities, before and after the regulator devices. So, the parameters of the power supply it gets higher, and the impact over the powered devices/stages it is also even more positive. One should remember that here is about a primary power supply, which is meant to deliver raw power further to the rest of the power system, distributed on local processing stages. So, the noise level of a such primary power supply does not necessary have to be of an ultra low noise one standard. What is important here, in my opinion, is the completely different powering approaches between a SMPS and a analogue PSU. A SMPS it produce over the main DC on its output, a large spectre/level HF noises, not possible to be completely filtered out, while a linear PSU does not. There is also obvious that the way a SMPS it power a system it have negative impact over the quality of the final result. In my opinion, this is a real fact, demonstrated very simple by replacing the SMPS, by a linear PSU (or the opposite...).
I understand Coris no problem :)
OPPO 105EU
SONY HW55 sur toile Cinescreen 4K reférence.
Stéréo : Wavecor WF182BD10-SB acoustics TW29RN
Centrale : Wavecor WF182BD10-SB acoustics TW29RN
Surround : Focal IC-706V
Sub : Eminence Lab-12
Ampli : CROWN XTI - HYPEX PSC2.400 - T.amp
User avatar
laforcetrankil
Posts: 891
Joined: Sun Aug 12, 2012 8:52 am

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by laforcetrankil »

Suite à l'achat de cette oppo et des échanges avec Coris, je vais l'envoyer en Norvège pour un petit tweak (alim+horloge+optimisation carte audio).

Restera à y loger le filtre secteur JCGB ainsi qu'une fiche secteur plus HDG.

Résultat et retour deuxième partie du mois de septembre!
VP Sony HW65ES - Ecran Xtrem Daylight 0.9 - Oppo UBD-203 EU - Goldmund Mimesis 30 - Ampli Trigon TRIGON TRE 50 M - Ampli INTEGRA RDA-7.1 - Enceintes Paradigm Tribute / Paradigm Inspiration / Studio Sub 12 /DALI Opticon LCR
User avatar
DrPrice
Posts: 139
Joined: Mon Aug 08, 2016 11:47 am

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by DrPrice »

Hiperia wrote:
Hiperia wrote: - Le suivi de OPPO est top ( mise à jour ).
- Grande possibilité d'évolution ( tweak ).
- Certaine fonction bien spécifique ( scaler , lecture son HD sur mkv etc ).
- La qualité du matériel. j'ai eu tout les OPPO depuis les 83. Aucune panne !
Voila pourquoi il y à une différence de prix significative.
Certain pense que c'est justifié et d'autre non .....
Je trouve ça pas "largement suffisant" pour le justifier, mais je pense que lorsque je monterai mon système je ne ferai pas l'impasse sur ce genre de petits plus, même si ça fait toujours quelque chose de payer un lecteur 800€ quand t'en as à 150 quoi, mais je sais, tout est pareil comme ça. Mais je trouve ça moins choquant de payer une 911 à 100.000€ qu'une Mégane RS à 45.000€ haha !

Mais toutes proportions gardées, je suis assez d'accord avec l'écart de prix entre des platines médiocres et très HdG !
Salon : Sony KD-55X8005C + Bose Solo 15 Serie II + PS4 / Projecteur Sanyo PLV-Z3 + Écran Celexon
Chambre : Philips 47PFL5008H + Bose Solo 15
Audio portable : Bose SoundTouch 30 - B&W Zeppelin - Bose QC25 - Sony MDR-1AB - Shure SE535
User avatar
jacko
Posts: 2587
Joined: Fri Jul 19, 2013 1:17 pm

Re: OPPO BDT-101CI : lecteur Blu-ray modulaire avec DAC AKM

Post by jacko »

En hifi et HC le gain de performance est indexé sur une hausse de prix exponentielle.

C'est lié à la réduction des marchés par tranche tarifaire (niveau de gamme).
Post Reply