Re: OPPO BDP-103EU & BDP-105EU Modifiés & Tweaks
Posted: Thu Apr 17, 2014 2:14 pm
Merci beaucoup! Kern-HD 
@Vcinephile
Je ne pense pas que nicolas ou jacko soient contre l'essai d'une vinculum!
Au choix: sud ouest contre sud est :rofl:
Il y aura au moins une 105d signature à mettre en compétition avec!
Sinon des nouvelles de Doug de chez asi-tek pour la 105
http://www.asi-tek.com/
Here is the list of mods for the BDP-105. I offer the mods in a good/better/best configuration due to so many custom requests due to budget constraints. Some people only want to spend $500 or $1000 and some want the full monty at over $3K.
~Budget mod $495 Low Impedance ultra fast rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, RFI shielding to transport and power transformer, transport mods, EMI/RFI shielding, 2ch Analog output stage parts upgrade and significant signal shortening.
~Premium mod/rebuild $995: NewClassD Neutrino DSP Clock upgrade, Low Impedance ultra fast rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, low noise high speed voltage regulator upgrades, RFI shielding to transport and power transformer, transport mods, EMI/RFI shielding on chipsets, 2ch Analog output stage parts upgrade and 2ch high performance audio output signal/isolation transformer rebuild upgrade (No signal coupling capacitors!!!). XLR outputs can be 100% true dual differential balanced. Silver wiring and natural unbleached cotton tubing
~Statement mod/rebuild $1795: NewClassD Neutron Star Flagship Master DSP Clock upgrade, Exotic ultra fast cryo-treated diode rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, Ultra low noise high speed voltage regulators upgrade, wood damping for transformer, transport tweak mods, EMI/RFI shielding on chipsets, 2ch Analog output stage parts upgrade and 2ch Signature level audio output signal/isolation transformer upgrade (No signal coupling capacitors!!!). XLR outputs can be 100% true dual differential balanced or just use RCA's, Silver wiring and natural unbleached cotton tubing (short wiring)
Additional "add-on" upgrade options:
~Bybee Music Rails DC power conditioning $200/1 (DSP), $350/2 (DSP/DSP Clocking), $550/4 (DSP/DSP Clocking/analog output stage voltages) or $800 if you do ALL of them (6 total) including the USB input circuit. HIGHLY Recommended upgrade, almost everyone gets these because they make such a huge improvement by reducing noise up to 45db directly to the voltage rail/circuit load!
~Bybee Filters Triple Combo $450 (1 Silver Bybee for DSP clocking, 2 Regular for AC mains power supply)
~7.1ch analog rebuild $995: 7.1 Analog output stage parts upgrade and 7.1 ch high performance audio output signal/isolation transformer upgrade (significant signal shortening) Add $400 for statement version transformers
~ASi OTM (Off The Mains) low Impedance battery power supply for critical audio processing circuits and clocking $695. Upgrade to the $995 version that will power the DSP/Clocking AND Analog output stage voltages. REMOVE AC MAINS from critical audio processing!!!!(HIGHLY RECOMMENDED for very best BDP-105 performance). The non-critical circuits are still powered by the AC mains but the critical circuits are powered by the external low impedance battery power supply.
~Multi Region Multi Zone Region Free upgrade circuit board: $125, DVD Region 1-6, Blu-Ray A, B, C
~Headphone Output stage modifications $100: Replace stock headphone wiring to silver wire/cotton tubing, upgrade passive components. Output voltage can be change i
~USB input circuit upgrade: Replace stock USB receiver clock with either NewclassD Neutrino ($295) or the flagship Neutron Star clock ($600).
~USB circuit Bybee Music rail option: Bybee Music Rail upgrade to drastically lower power supply noise in the USB circuit, and for the upgraded clock $350 for these 2 installed.
Il faut au minimum une loupe pour le faire!