Re: Ampli Cambridge Audio Azur 751R
Posted: Thu Dec 06, 2012 7:54 am
Tant qu'à faire (même si je crois qu'il n'y a rien de nouveau par rapport à ce qu'on savait déjà) :
Azur 651R Features:
175 watts RMS per channel
4 HDMI inputs, 2 HDMI outputs
Anchor Bay ABT2010 scaler video
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs
Audyssey Room EQ, Dynamic Volume and Autosetup
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD
High Resolution or Master Audio formats with encoded height information on standard 5.1, 6.1 or 7.1 speaker setups
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Individual Crossovers and Advanced Bass Management
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Pure Analogue Stereo Direct
Also controllable from 651BD/751BD remote.
Azur 651R Specifications:
Power output:
- 175 watts rms per channel, 6 ohms (two channels driven)
- 140 watts rms per channel, 8 ohms (two channels driven)
- 100 watts rms per channel, 8 ohms (all 7 channels driven)
HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.
Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Anchor Bay ABT2010 scaler
Audio Inputs
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 5 x digital co-axial, 4 x digital optical
Video Inputs:
- 4 HDMI, 3 Component Video, 4 Composite, 4 S-Video
Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs
Main Video Output:
- 2 x HDMI
Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs
Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical
Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
- 1 RS232C, 1 IEC type mains inlet
Standby power consumption:
- <1w
Max power consumption:
- 1400w
Dimensions:
- H x W x D 150 x 430 x 420mm
Weight: 15.3kg
Taken directly from Spearit sound website.
Here is the 751r:
Azur 751R 7.1 Home Cinema Receiver
Features:
200 watts RMS per channel
6 HDMI in, 2 out with support for 3D TV / Deep colour passthru / Audio Return Channel reception.
Anchor Bay ABT2010 scaler video scaler for upscaling and analogue to digital video transcoding/scaling (composite, S-video and component video to HDMI)
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs including Dolby Digital Plus, DTS- HD High Resolution and the Lossless Dolby True HD and DTS-HD Master Audio formats
Additional DSP performing 24-bit/192kHz ATF audio upsampling on all channels
Pure Analogue Stereo Direct mode for audiophile playback of analogue stereo sources.
Audyssey Room EQ, Dynamic Volume and Autosetup for the best performance in almost any environment
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD High Resolution or Master Audio formats with encoded
height information on standard 5.1, 6.1 or 7.1 speaker setups
Individual Crossovers and Advanced Bass Management
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Asynchronous USB audio input allowing high resolution audio streaming from computer
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Also controllable from 651BD/751BD remote.
Specifications:
Power output:
- 200 watts rms per channel, 6 ohms (two channels driven)
- 170 watts rms per channel, 8 ohms (two channels driven)
- 120 watts rms per channel, 8 ohms (all 7 channels driven)
HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.
Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Additional AD DSP performing 24bit/192kHz ATF Upsampling
- Anchor Bay ABT2010 scaler
- USB 1.0: 24-bit 44.1kHz, 48kHz, 96kHz
- USB 2.0: 16/24-bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
Audio Inputs:
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 1 x asynchronous USB audio input
- 5 x digital co-axial, 4 x digital optical
Video Inputs:
- 6 HDMI (5 x HDMI 1.4, 1 x front panel HDMI 1.3), 3 Component Video, 4 Composite, 4 S-Video
Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs
Main Video Output:
- 2 x HDMI
Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs
Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical
Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
-1 RS232C, 1 IEC type mains inlet
Max power consumption:
- 1800W
Dimensions
- H x W x D 150 x 430 x 420mm
Weight: 16.2kg
Azur 651R Features:
175 watts RMS per channel
4 HDMI inputs, 2 HDMI outputs
Anchor Bay ABT2010 scaler video
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs
Audyssey Room EQ, Dynamic Volume and Autosetup
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD
High Resolution or Master Audio formats with encoded height information on standard 5.1, 6.1 or 7.1 speaker setups
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Individual Crossovers and Advanced Bass Management
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Pure Analogue Stereo Direct
Also controllable from 651BD/751BD remote.
Azur 651R Specifications:
Power output:
- 175 watts rms per channel, 6 ohms (two channels driven)
- 140 watts rms per channel, 8 ohms (two channels driven)
- 100 watts rms per channel, 8 ohms (all 7 channels driven)
HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.
Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Anchor Bay ABT2010 scaler
Audio Inputs
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 5 x digital co-axial, 4 x digital optical
Video Inputs:
- 4 HDMI, 3 Component Video, 4 Composite, 4 S-Video
Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs
Main Video Output:
- 2 x HDMI
Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs
Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical
Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
- 1 RS232C, 1 IEC type mains inlet
Standby power consumption:
- <1w
Max power consumption:
- 1400w
Dimensions:
- H x W x D 150 x 430 x 420mm
Weight: 15.3kg
Taken directly from Spearit sound website.
Here is the 751r:
Azur 751R 7.1 Home Cinema Receiver
Features:
200 watts RMS per channel
6 HDMI in, 2 out with support for 3D TV / Deep colour passthru / Audio Return Channel reception.
Anchor Bay ABT2010 scaler video scaler for upscaling and analogue to digital video transcoding/scaling (composite, S-video and component video to HDMI)
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs including Dolby Digital Plus, DTS- HD High Resolution and the Lossless Dolby True HD and DTS-HD Master Audio formats
Additional DSP performing 24-bit/192kHz ATF audio upsampling on all channels
Pure Analogue Stereo Direct mode for audiophile playback of analogue stereo sources.
Audyssey Room EQ, Dynamic Volume and Autosetup for the best performance in almost any environment
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD High Resolution or Master Audio formats with encoded
height information on standard 5.1, 6.1 or 7.1 speaker setups
Individual Crossovers and Advanced Bass Management
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Asynchronous USB audio input allowing high resolution audio streaming from computer
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Also controllable from 651BD/751BD remote.
Specifications:
Power output:
- 200 watts rms per channel, 6 ohms (two channels driven)
- 170 watts rms per channel, 8 ohms (two channels driven)
- 120 watts rms per channel, 8 ohms (all 7 channels driven)
HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.
Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Additional AD DSP performing 24bit/192kHz ATF Upsampling
- Anchor Bay ABT2010 scaler
- USB 1.0: 24-bit 44.1kHz, 48kHz, 96kHz
- USB 2.0: 16/24-bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
Audio Inputs:
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 1 x asynchronous USB audio input
- 5 x digital co-axial, 4 x digital optical
Video Inputs:
- 6 HDMI (5 x HDMI 1.4, 1 x front panel HDMI 1.3), 3 Component Video, 4 Composite, 4 S-Video
Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs
Main Video Output:
- 2 x HDMI
Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs
Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical
Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
-1 RS232C, 1 IEC type mains inlet
Max power consumption:
- 1800W
Dimensions
- H x W x D 150 x 430 x 420mm
Weight: 16.2kg