Ampli Cambridge Audio Azur 751R

[scanlan75018]

Tant qu'à faire (même si je crois qu'il n'y a rien de nouveau par rapport à ce qu'on savait déjà) :
Azur 651R Features:

175 watts RMS per channel
4 HDMI inputs, 2 HDMI outputs
Anchor Bay ABT2010 scaler video
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs
Audyssey Room EQ, Dynamic Volume and Autosetup
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD
High Resolution or Master Audio formats with encoded height information on standard 5.1, 6.1 or 7.1 speaker setups
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Individual Crossovers and Advanced Bass Management
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Pure Analogue Stereo Direct
Also controllable from 651BD/751BD remote.
Azur 651R Specifications:

Power output:
- 175 watts rms per channel, 6 ohms (two channels driven)
- 140 watts rms per channel, 8 ohms (two channels driven)
- 100 watts rms per channel, 8 ohms (all 7 channels driven)

HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.

Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Anchor Bay ABT2010 scaler

Audio Inputs
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 5 x digital co-axial, 4 x digital optical

Video Inputs:
- 4 HDMI, 3 Component Video, 4 Composite, 4 S-Video

Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs

Main Video Output:
- 2 x HDMI

Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs

Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical

Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
- 1 RS232C, 1 IEC type mains inlet

Standby power consumption:
- <1w

Max power consumption:
- 1400w

Dimensions:
- H x W x D 150 x 430 x 420mm

Weight: 15.3kg

Taken directly from Spearit sound website.


Here is the 751r:

Azur 751R 7.1 Home Cinema Receiver

Features:

200 watts RMS per channel
6 HDMI in, 2 out with support for 3D TV / Deep colour passthru / Audio Return Channel reception.
Anchor Bay ABT2010 scaler video scaler for upscaling and analogue to digital video transcoding/scaling (composite, S-video and component video to HDMI)
Scaler bypass mode – allows user to engage/disengage video scaler for each input as appropriate
Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion
Cirrus Logic dual 32-bit DSPs for compatibility with the latest CODECs including Dolby Digital Plus, DTS- HD High Resolution and the Lossless Dolby True HD and DTS-HD Master Audio formats
Additional DSP performing 24-bit/192kHz ATF audio upsampling on all channels
Pure Analogue Stereo Direct mode for audiophile playback of analogue stereo sources.
Audyssey Room EQ, Dynamic Volume and Autosetup for the best performance in almost any environment
Full 5.1/7.1 multi-channel analogue inputs and preamp outputs
DTS Speaker re-mapping allows the playback of DTS-HD High Resolution or Master Audio formats with encoded
height information on standard 5.1, 6.1 or 7.1 speaker setups
Individual Crossovers and Advanced Bass Management
Independent Zone 2 audio and video output
Supplied with separate zone 2 remote control
Twin subwoofer outputs
Asynchronous USB audio input allowing high resolution audio streaming from computer
Bi-amp mode for front left/right with surround back left/right in 5.1 set-up
X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance
FM/AM tuner with RDS
RS232 control, IR Emitter Input, trigger output
Low resonance, acoustically damped full metal chassis
Also controllable from 651BD/751BD remote.
Specifications:

Power output:
- 200 watts rms per channel, 6 ohms (two channels driven)
- 170 watts rms per channel, 8 ohms (two channels driven)
- 120 watts rms per channel, 8 ohms (all 7 channels driven)

HDMI:
- HDMI 1.4, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep colour pass through supported.

Architecture:
- Cirrus Logic CS43122 24 Bit 192kHz capable DAC for Front Left & Right
- Cirrus Logic CS52526 24 Bit 192kHz capable CODEC for surround channels + 24 Bit 2 channel A/D Conversion
- Cirrus Logic CS497004 dual 32 bit DSP
- Additional AD DSP performing 24bit/192kHz ATF Upsampling
- Anchor Bay ABT2010 scaler
- USB 1.0: 24-bit 44.1kHz, 48kHz, 96kHz
- USB 2.0: 16/24-bit 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz

Audio Inputs:
- 6 x Line Level Analogue
- Tuner (FM/AM)
- 7.1 multi-channel analogue Input
- 1 x asynchronous USB audio input
- 5 x digital co-axial, 4 x digital optical

Video Inputs:
- 6 HDMI (5 x HDMI 1.4, 1 x front panel HDMI 1.3), 3 Component Video, 4 Composite, 4 S-Video

Main Audio Outputs:
- 7 Amplified Speaker Outputs, 7.2 Preamp outputs

Main Video Output:
- 2 x HDMI

Zone 2 outputs:
- Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs

Recording Audio Outputs:
- 2 Line Level Analogue
- 2 Digital Co-Axial, 2 Digital Optical

Other connections:
- 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended
- 3 x IR emitter outputs, 2 x IR emitter inputs, 1 x zone 2 IR emitter input
- 2 x trigger outputs
-1 RS232C, 1 IEC type mains inlet

Max power consumption:
- 1800W

Dimensions
- H x W x D 150 x 430 x 420mm

Weight: 16.2kg

[SuperLumberjack]

Alors, il est arrivé ?

[Yahoo MMCrawler [Bot]]

ha ça y est !!? :gne:

Je vais contacter PPL Audio pour voir s'il est dispo en France.

[SuperLumberjack]

Perso je ne sais pas J'ai juste lu sur HCFR qu'il est censé sortir cette semaine

Pourvu qu'il n'y ait pas la fin du monde :sweat: Non je déconne :biglol: Enfin non

[Yahoo MMCrawler [Bot]]

Ha oui c'est vrai, on approche du 21/12/2012 !

Bon, même si on y croit pas, tout le monde aura tout de même une petite appréhension. Bon allé Cambridge, il faut qu'on écoute ce 751R avant que tout parte en fumée ! :biglol:

[firstclass91]

Ha oui c'est vrai, on approche du 21/12/2012 !

Bon, même si on y croit pas, tout le monde aura tout de même une petite appréhension. Bon allé Cambridge, il faut qu'on écoute ce 751R avant que tout parte en fumée ! :biglol:

Merdoum!!
J'avais zap' la fin du monde le 21/12
Faut que je dise a Wafette qu'on ouvre les cadeaux de Noel se soir alors!!
Que j'ai le temps de tester mon lecteur Pana' et mes cables enceintes moi, non mais!!






:dehors:

[SuperLumberjack]

:biglol:

[Olivier]

Comme je m'y attendais, le 751R n'est pas sorti pour Noël...
|-) |-) |-)

[Yahoo MMCrawler [Bot]]

Oui, bon, et bien à force d'attendre on va s'en lasser

Bon, d'un autre côté on n'est toujours pas mort après ce fameux 21/12/2012 :biglol:

[SuperLumberjack]

Oh my god ! Je suis vivant :rofl: :biglol:

Tout ce que j'espère pour cet ampli Cambridge Audio, c'est que s'ils mettent autant de temps c'est pour faire quelques ajouts comme le décodage du DSD par exemple. Ce serait pas mal en tout cas