OPPO BDP-103EU & BDP-105EU Modifiés & Tweaks

[Vcinephile]

Merci beaucoup! Kern-HD

[tekko]

@Vcinephile
Je ne pense pas que nicolas ou jacko soient contre l'essai d'une vinculum!
Au choix: sud ouest contre sud est :rofl:
Il y aura au moins une 105d signature à mettre en compétition avec!

Sinon des nouvelles de Doug de chez asi-tek pour la 105
http://www.asi-tek.com/

Here is the list of mods for the BDP-105. I offer the mods in a good/better/best configuration due to so many custom requests due to budget constraints. Some people only want to spend $500 or $1000 and some want the full monty at over $3K.

~Budget mod $495 Low Impedance ultra fast rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, RFI shielding to transport and power transformer, transport mods, EMI/RFI shielding, 2ch Analog output stage parts upgrade and significant signal shortening.

~Premium mod/rebuild $995: NewClassD Neutrino DSP Clock upgrade, Low Impedance ultra fast rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, low noise high speed voltage regulator upgrades, RFI shielding to transport and power transformer, transport mods, EMI/RFI shielding on chipsets, 2ch Analog output stage parts upgrade and 2ch high performance audio output signal/isolation transformer rebuild upgrade (No signal coupling capacitors!!!). XLR outputs can be 100% true dual differential balanced. Silver wiring and natural unbleached cotton tubing

~Statement mod/rebuild $1795: NewClassD Neutron Star Flagship Master DSP Clock upgrade, Exotic ultra fast cryo-treated diode rectifiers, Super Fast Rubycon Z series DSP and 2ch Analog capacitors upgrade, Ultra low noise high speed voltage regulators upgrade, wood damping for transformer, transport tweak mods, EMI/RFI shielding on chipsets, 2ch Analog output stage parts upgrade and 2ch Signature level audio output signal/isolation transformer upgrade (No signal coupling capacitors!!!). XLR outputs can be 100% true dual differential balanced or just use RCA's, Silver wiring and natural unbleached cotton tubing (short wiring)


Additional "add-on" upgrade options:

~Bybee Music Rails DC power conditioning $200/1 (DSP), $350/2 (DSP/DSP Clocking), $550/4 (DSP/DSP Clocking/analog output stage voltages) or $800 if you do ALL of them (6 total) including the USB input circuit. HIGHLY Recommended upgrade, almost everyone gets these because they make such a huge improvement by reducing noise up to 45db directly to the voltage rail/circuit load!
~Bybee Filters Triple Combo $450 (1 Silver Bybee for DSP clocking, 2 Regular for AC mains power supply)
~7.1ch analog rebuild $995: 7.1 Analog output stage parts upgrade and 7.1 ch high performance audio output signal/isolation transformer upgrade (significant signal shortening) Add $400 for statement version transformers
~ASi OTM (Off The Mains) low Impedance battery power supply for critical audio processing circuits and clocking $695. Upgrade to the $995 version that will power the DSP/Clocking AND Analog output stage voltages. REMOVE AC MAINS from critical audio processing!!!!(HIGHLY RECOMMENDED for very best BDP-105 performance). The non-critical circuits are still powered by the AC mains but the critical circuits are powered by the external low impedance battery power supply.
~Multi Region Multi Zone Region Free upgrade circuit board: $125, DVD Region 1-6, Blu-Ray A, B, C
~Headphone Output stage modifications $100: Replace stock headphone wiring to silver wire/cotton tubing, upgrade passive components. Output voltage can be change i
~USB input circuit upgrade: Replace stock USB receiver clock with either NewclassD Neutrino ($295) or the flagship Neutron Star clock ($600).
~USB circuit Bybee Music rail option: Bybee Music Rail upgrade to drastically lower power supply noise in the USB circuit, and for the upgraded clock $350 for these 2 installed.

[tekko]

L'horloge du Sabre ES9018S sur la carte analogique stéréo de la 105.

Il y a 4 points de soudure sous l'horloge, je vous laisse imaginer la taille des soudures Il faut au minimum une loupe pour le faire!

[Astérix]

Même taille que les autres horloges je crois...

Exact, je l'ai fait à la loupe quand j'ai installé la TCXO...

[tekko]

Même taille que les autres horloges je crois...

Exact, je l'ai fait à la loupe quand j'ai installé la TCXO...

Oui, pas de raison qu'ils changent de fournisseur pour les horloges.

Bravo pour l'installation en tout cas, il fallait le faire!

Tu as repiqué l'alim au dos d'un condo 10000uf 10v je suppose?

[Astérix]

Oui, la tcxo est alimentée par la carte LPM V2 modifiée en full Nichicon KW.
Au dos de la carte sur les deux patte d'un 10kµF 16V

[tekko]

Tu veux déjà changer les Txco par des Oxco???
Déçu ou tu en attendais plus peut-être ou la soif du gain?
JL ne communique pas sur le bruit/jitter de ses horloges.

[Astérix]

Faim et soif... :biglol:

[tekko]

Faim et soif... :biglol:

C bon ça

[Kern-HD]

Astérix quel est le prix des OXCO ?